After a long winter in storage, it's time to start using your robot lawn mower again. To ensure it functions optimally and your lawn is perfectly mowed, there are a few important steps you need to follow. In this blog, you'll read how to prepare your robot lawn mower for the new mowing season.
1. Check the Connections and the Boundary Wire
If the charging station has been left outside, it is essential to check the boundary wire and all connections:
- Is the boundary wire still firmly in place? Check that the cable is not damaged or loose anywhere.
- Are the connections in the charging station still properly connected? Any loose cables can cause problems with charging.
2. Correctly Placing the Charging Station
If the charging station has been stored indoors and needs to be reconnected, make sure that:
- The charging station is on a flat surface, in the correct direction so that the mower can smoothly drive in and out.
- Place the charging station with the exit side facing the correct direction. (Dirk and Betsie to the left and Teun and Katrien to the right, both when you look at the charging station from the field.)
- Connect the boundary wires to the charging station. The boundary wire that goes under the charging station always connects to the red connector.
- Reconnect the power supply and check that the station is functioning correctly.
- Remove any dirt or leaves that have accumulated in or around the charging station.
3. Checking the Battery
After a long winter storage, you need to thoroughly check the battery:
- Reinsert a fully charged battery into the mower if you had previously removed it.
- Check that the battery is still in good condition and shows no signs of wear or damage.
- Fully charge the mower before using it to ensure a smooth start.
4. Inspecting and Replacing Blades
Sharp blades are essential for a beautifully mowed lawn:
- Check if the blades are still sharp and show no rust or damage.
- Replace dull or damaged blades for an optimal mowing result.
5. Thorough Cleaning
- Remove grass clippings and dirt from the underside of the robot lawn mower.
- Clean the wheels so that the mower can move smoothly across the lawn.
Conclusion
By properly preparing your robot lawn mower for the new season, you ensure that it functions optimally again and your lawn looks neat all year round. With a thorough check of the boundary wire, charging station, battery, and blades, you prevent problems and extend the lifespan of your mower. This way, you can effortlessly enjoy a perfectly mowed lawn!
Don't have a robot lawn mower yet, but considering buying one? Check out our models and choose the mower that perfectly suits your garden!