Bobbie 2.0: How do I get my windows really clean?"

It is very important that the robot is used regularly. The robot uses little water and can therefore remove small amounts of dirt well, but not stubborn or large amounts of dirt at once.

It is advisable to;

• Always ensure clean cloths and replace them in between if the windows do not become properly clean.
  The cloths can be washed in the washing machine at 30-40 degrees.

• We strongly recommend cleaning the windows by hand before the first use. So that ingrained dirt is removed. If the windows have previously been washed or cleaned with a product such as Glassex, the window must first be thoroughly cleaned with a little cleaning vinegar or/and all-purpose cleaner. Products such as Glassex leave a film that could cause Bobbie to streak or slip.
  Tip: The easiest way is to let the dirt soak first by wetting it thoroughly.
  • After the first cleaning, it is advisable to use Bobbie/Evert frequently. This will keep the windows nice and clean.
  • If there is a lot of sand on the windows, it is advisable to let the robot clean them once with a dry cloth and without the spray function. This is to prevent model formation. Afterwards, the robot can be used again with spray. It is best to use osmosis water/demineralized or boiled and cooled water with a dash of cleaning vinegar. Otherwise, limescale can cause streaks and clog the spray system.

- For Bobbie (without water spray) you can use a little all-purpose cleaner in the manual spray bottle.

- For Bobbie with water spray you can add a little all-purpose cleaner to the small reservoir (18ml).

- For Evert do not add any cleaning agent.