Teun & Katrien: Boundary wire fault/interrupted (E11).

If the robotic lawnmower indicates an "E11" error, the LED on the charging station may be:

A. Flashing red: The cable is not connected or is cut.

B. Flashing green: The robot is charging.

C. Solid green LED: The cable is correctly installed and the robot is fully charged.

It is possible that the boundary wire is slightly damaged somewhere (e.g., by animals in the ground or garden work). This causes the circuit to be closed, but the signal is not strong enough for the mower.

To check if this is the problem, lay a new short cable around the charging station (for example, 4x4 meters). If this no longer gives an error, the boundary wire is damaged. Check the boundary wire for damage, kinks, or discoloration (whitened sheath). The best way is to run the cable through your fingers. Or use a cable detector for this.

If the new 4x4 cable works normally, it means that the robot and charging station are working normally. Therefore, there is no point in checking the robot or charging station.
If the new 4x4 cable does show a problem, we can check your charging station and mower and repair them if necessary.